Easy to build and great fun to fly. May be built with the wing fixed or removable. A consistent top finisher in Flying Aces events. Pre-1942 design, eligible for Society of Antique Modelers (SAM) contests.
This free flight rubber powered kit contains a full-size rolled plan, building and flying instructions, hand picked printed balsa and balsa strip wood, rubber motor, 12" E-B propeller, EBM thrust bearing, clear plastic for the windshield, wheels, landing gear wire, and Easy Built Lite tissue in a variety of bright colors. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.
Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Uhu glue stick, Sobo canopy glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 20% off individually priced items.item B329 Price: $78.15
Excludes the book on rubber power and the Uhu stick. Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Sobo canopy glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 20% off individually priced items.item B332 Price: $64.95
Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 15% off individually priced items.item B330 Price: $43.08
Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 25% off individually priced items.item B331 Price: $29.06
"The Miss Canada flies very well on 16 strands of 1/8" Super Sport." - George White
Instructions for making a DT(dethermalizer) for your plane.
"Thank you very much for the great kit with great flying model. I converted it to electric motor with AC motors
and powered by two lipo battery (all in miniature version). It flies totally unspoiled. The entire model loaded with
electronics weighs 205 grams! Yesterday was maiden flight. Miss Canada Senior (electric) flying very very perfectly." - Frank Swiety, Slovak Republic.
Read Franks’s technical notes.
You can't get more Canadian than this clever tissue covering created by Bob Marchese.
Easy Built is the perfect name for your company for your models are indeed easy to build and fun to fly." Read Johnson
"Recorded flights of 4 min 11 seconds on 600 test winds!" - Mike Dorey
"I just finished your Miss Canada Senior, a truly fun kit to build. This is only my second kit. Following Don Ross’ recommendations to build a stable non-scale flyer as a beginner’s plane, I decided to order a Miss Canada. By the way, this plane has also helped me improve my tissue covering skills since I used the glue stick method you recommended. Also the glues I ordered from you are great." - Tom O'Neal
"The plane actually made a good trainer because of its predictable
flight characteristics and gentle landings. (Just steer it over the
runway and it will land itself!)" - Ben Newkirk
Read Ben's conversion notes.