|
|
|
| Home
/ Model Kits / Free Flight
Rubber Powered Airplane Kits / FF-66
North American P-51 Mustang
Kit FF-66 North American P-51B Mustang is a 1/16 scale, flying model
that uses the Precision Beam method of
construction. Kit includes a vacuum-formed canopy. Qualifies
for Society of Antique Modelers (SAM) competitions.
The P-51 airframe and Rolls Royce Merlin engine could out-fly anything
in the sky during WWII. It was used as a bomber escort making possible
the deep bombing raids of 1944.
This free flight rubber powered kit contains a full-size
plan, building and flying instructions, printed balsa wood, hand-picked
balsa strip wood, rubber motor, propeller, nose package, vacuum-formed
canopy, wheels, landing gear, Easy Built Lite
tissue
and TissueCal™ markings which are much lighter than press-on
or water slide decals because they are printed directly on tissue.
You will need a building board, pins, hobby
knife, fine sandpaper, and glue.
FF-66 North American P-51 Mustang
Wingspan: 28"
Class: Scale flyer
Building Skill / Flying Skill: Easy / Experienced
Price: $19.08
 Replacement TissueCal™ markings
for this kit. Price: $4.50/sheet
Replacement vacuum-molded canopy.
Price: $3.26
Customer photos:
Submit
a photo of your model!
 
 
 
Balsa Model Airplane Kit, Balsa flies better. |
Site Map Home
© 1999-2010 Easy Built Models. All rights reserved.
10/06/09 01:22 AM (EDT).
|
