kit FFP04 Half A Wasp
Free Flight Gas Powered Kits

Half A Wasp



The Half A Wasp is a down-sized version of the original Model Craft Wasp. A Texaco size model for .049 engine, it was designed by Robert Milligan, 1938-1939 Senior Canadian Champion. Pre-1942 design, eligible for Society of Antique Modelers (SAM) contests.

This free flight gas powered model kit contains a full size rolled plan, instructions, hand picked printed balsa, balsa sheet wood and balsa stripwood, laser cut aircraft grade plywood, hardwood, music wire, and Silkspan tissue covering. You will need an engine, fuel tank, fuel, propeller, wheels, building board, cutting tools, wire cutters, pliers, fine sandpaper, glue, and paint.

Half A Wasp

45" wingspan
Class: Sport model
Building Skill / Flying Skill: Experienced / Experienced
kit #FFP04 price: $74.95
Building Set for Rubber Power

Building Set for Rubber Power

Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Uhu glue stick, Sobo canopy glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 20% off individually priced items.

item B329 Price: $78.15
Building Set

Building Set

Excludes the book on rubber power and the Uhu stick. Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Sobo canopy glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 20% off individually priced items.

item B332 Price: $64.95
Advanced Tool Set

Advanced Tool Set

Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 15% off individually priced items.

item B330 Price: $43.08
Flight Pack for Rubber Power

Flight Pack for Rubber Power

Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 25% off individually priced items.

item B331 Price: $29.06
Customer photos: Submit a photo of your model!

1/2A Wasp built by Bruno Chiaranti

Model built by Bruno Chiaranti, Udine Italy, SAM62

kit FFP-04 Modelcraft 1/2A Wasp kit FFP-04 Modelcraft 1/2A Wasp kit FFP-04 Modelcraft 1/2A Wasp

"It is powered by a Texaco .049 Cox and is 2 channel r/c. The nose was extended 3/4" for balancing. It flys great!" - Henry Forbes


 

10/11/18 12:09 AM (EDT)