Although the Hawk, also known as the P-36, saw very little combat in American hands, this fighter was to see quite a bit of combat in foreign hands. In fact, it is one of the few military aircraft actually to see combat on both sides during the Second World War. The largest foreign operator of the Hawk was the Armee de l'Air, the French Air Force.
This kit is a 1:13 scale flying model, a vintage 1940 design by Ron Clarke, updated plans Pre-1942 design, eligible for Society of Antique Modelers (SAM) contests.
This free flight rubber powered kit contains a full-size rolled plan, hand-picked printed balsa and balsa stripwood, rubber motor, 12" EB propeller, EBM thrust bearing, clear plastic, vacuum-molded canopy, wheels, landing gear wire, TissueCal™ markings, and Easy Built Lite tissue in olive and light grey. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.
The Hawk canopy is made from crystal clear light weight PETG plastic.item B243 Price: $3.95
Markings for the Hawk are printed on white Easy Built Lite tissue.item B205 Price: $7.50/set
Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, glue stick, canopy glue/tacky glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 20% off individually priced items.item B329 Price: $79.95
Excludes the book on rubber power and the glue stick. Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, canopy glue/tacky glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 20% off individually priced items.item B332 Price: $66.95
Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 15% off individually priced items.item B330 Price: $45.99
Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 20% off individually priced items.item B331 Price: $34.95