Rubber Powered Aircraft Kits
Moffett
| FREE Shipping on orders over $150! * |
This is Roy Nelder’s original 1940 champion plane from the 1938/1940 International Moffett Trophy Contest. A great flying, high-wing, endurance plane. Pre-1942 design, eligible for Society of Antique Modelers contests.
This free flight rubber powered kit contains a full-size rolled plan, printed balsa and hand-picked balsa stripwood, FAI rubber motor, 12" E-B propeller, EBM thrust bearing, wire, and Easy Built Lite tissue in a variety of bright colors. To build this model you will need a building board set, hobby knife, wheels, fine sandpaper, and glue.
Roy Nelder’s Moffett
46" wingspanClass: Sport flying model
Building Skill / Flying Skill: Experienced / Experienced
kit #FF82 price: $61.50
Building Set for Rubber Power
Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, glue stick, canopy glue/tacky glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 25% off individually priced items! There is a limit of 2 sets per order.
item B329 Price: $79.95
Building Set
Excludes the book on rubber power and the glue stick. Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, canopy glue/tacky glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 25% off individually priced items! There is a limit of 2 sets per order.
item B332 Price: $66.95
Advanced Tool Set
Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 30% off individually priced items!
item B330 Price: $45.99
Flight Pack for Rubber Power
Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 23% off individually priced items!
item B331 Price: $34.95
"Here’s my Roy Nelder Moffet built from your kit FF-82. A lot of wood to put together, but the construction went well once I got a bigger building board. This is one large plane! Needed 3/16" incidence block under front of wing and 1/32" shim at back of stab to get smooth hand glide. Motor is twelve strand 1/4" FAI SuperSport unbraided rubber so there’s a little motor vibration at take off. Test flights so far are promising using 1/16" down and right thrust on the 15-inch, wooden 2-bladed freewheeling prop. Plane seems a little sensitive at times to winds from the side, probably due to its large rudder and stab. Thanks for making this great old timer available." - Mark Chomyn
