The Helldiver was a carrier-based divebomber produced for the United States Navy during World War II. It sank more enemy aircraft in the Pacific war than any other US or Allied aircraft.
This kit is a 1:23 scale flying model. Pre-1942 design, eligible for Society of Antique Modelers (SAM) contests.
This free flight rubber powered kit contains a full-size rolled plan, building and flying instructions, hand-picked printed balsa and balsa strip wood, rubber motor, EB propeller, EBM thrust bearing, wheels, wire, vacuum-molded exhaust, air scoop, and canopies for front and rear cabins, TissueCal™ markings, and Easy Built Lite tissue in dark grey, light sky blue, and medium navy. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.
The canopy for front and rear cabins are made from crystal clear light weight PETG plastic. Also included are vacuum-molded exhaust and air scoop.item B41 Price: $6.95
Markings for the Helldiver are printed on white Easy Built Lite white tissue.item B114 Price: $4.95/set
Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Uhu glue stick, Sobo canopy glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 20% off individually priced items.item B329 Price: $78.15
Excludes the book on rubber power and the Uhu stick. Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Sobo canopy glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 20% off individually priced items.item B332 Price: $64.95
Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 15% off individually priced items.item B330 Price: $43.08
Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 25% off individually priced items.item B331 Price: $29.06
"I detailed a lot of the cockpit and the rear gunner compartment, but I will let the pictures speak for themselves. I modeled this airplane after the Curtiss SB2C-4 Helldiver." - Bill Kallstrom
"Here is my Helldiver model. Made for display. I enjoy building your kits." - Ronald Lind
"Have been playing with my MagnaBoard. With the purchase of some inexpensive frame brackets I now have a way to accurately jig up box structures. I have also used them to jig up my Easy Built Helldiver to glue the wings on. Hoping to fly WW 2 combat for the first time this year. Keep those great models coming!" - Bob Bard