The Piper Cub was originally built by Piper Aircraft Corporation. It was very popular with the flying public because of its price, light weight, and performance. It was also used by the military beginning in 1941 under the name L-4 Grasshopper. Between 1941 and 1945, the Army procured almost 6,000 Piper Aircraft. During WWII, "Grasshoppers" performed a wide variety of functions throughout the world such as directing artillery fire, pilot training, glider pilot instruction, courier service and front-line liaison.
This kit is a 1:19 scale flying model. Pre-1942 design, eligible for Society of Antique Modelers (SAM) contests.
This free flight rubber powered kit contains a full-size rolled plan, building and flying instructions, hand picked printed balsa and balsa strip wood, rubber motor, E-B propeller, EBM thrust bearing, clear plastic for the windshield, wheels, landing gear wire, and Easy Built Lite tissue in cub yellow. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.
Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Uhu glue stick, Sobo canopy glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 20% off individually priced items.item B329 Price: $78.15
Excludes the book on rubber power and the Uhu stick. Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Sobo canopy glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 20% off individually priced items.item B332 Price: $64.95
Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 15% off individually priced items.item B330 Price: $43.08
Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 25% off individually priced items.item B331 Price: $29.06
"It came out very light...initial low power flights are very promising, flew off the board, no lie!" - Wally Farrell