|FREE Shipping on orders over $150! *|
The Junior Commercial is a high-wing, endurance sport flyer. Extremely competitive in Flying Aces events with flights over 4 minutes! Design approved by the Air Cadet League of Canada. Includes instructions for conversion to CO2. Pre-1942 design, eligible for Society of Antique Modelers (SAM) contests.
This free flight rubber powered kit contains a full-size rolled plan, laser cut balsa parts, balsa stripwood, rubber motor, E-B propeller, EBM thrust bearing, clear plastic for the windshield, wheels, landing gear wire, and Easy Built Lite tissue in a variety of bright colors. To build this model you will need a building board set, hobby knife, fine sandpaper, and glue.
Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, glue stick, canopy glue/tacky glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 25% off individually priced items! There is a limit of 2 sets per order.item B329 Price: $79.95
Excludes the book on rubber power and the glue stick. Includes a hobby knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, canopy glue/tacky glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 25% off individually priced items! There is a limit of 2 sets per order.item B332 Price: $66.95
Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 30% off individually priced items!item B330 Price: $45.99
Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 23% off individually priced items!item B331 Price: $34.95
12-year-old Simon from Ottawa, Canada built this beautiful Junior Commercial, a Christmas gift from his grandma.
"This was a good kit, and very enjoyable to build. It should be a fine flier too! We recently moved to Highland Il.,hence the "Spirit Of Highland" logo on the side. Thanks for providing your many great products." - John McCorkle
"This kit was built by me and was a pleasure to build. No real mods. It's built straight from the kit." - Mark Mulanouskus
"Here's the Jr Commercial from your kit. Lost it OOS." - Bill Piatek
"I have completed the Jr Commercial and must say it was a very enjoyable kit to build. Not only was the wood of great quality, it captures the essence of an old time Cabin Plane. The only changes made were to make the wheels out of balsa since the kit wheels were too heavy and use a three point attachment for the wing instead of four. ... Flew it last night, some trimming needed but I was getting 50 seconds so far. I used four strands of 1/8" but I think that is too much." John Majane
"Here's a few photos of the first kit that I've bought and built from Easy Built Models. It was a blast to build and has had some great flights to date. I'm currently building the "Korda Victory". Hoping to get this ready for the Spring weather. I have also introduced my son to model making with his first ever kit, the Enfant. Thanks for providing such great kits at such excellent prices!" - Ron Sheetz