kit CA03LC Jimmie Allen Special (Laser Cut)
Laser Cut Aircraft Kits

Jimmie Allen Special (Laser Cut)



This flying model was designed by Speed Robertson and engineered by Reginald Denny. It qualifies for 4 Flying Aces Club events: Jimmie Allen, Old Time Rubber, Old Time Two-Bit Rubber, and Embryo. Pre-1942 design, eligible for Society of Antique Modelers (SAM) contests.

This free flight rubber powered model airplane kit includes a full-size rolled plan, building and flying instructions, laser cut balsa parts and hand-picked balsa strip wood, Easy Built Lite tissue in a variety of bright colors, FAI rubber motor, E-B propeller, EBM thrust bearing, wheels, wire, clear plastic for the windshield, and 1 pair of Jimmie Allen TissueCal™ markings. To build this model you will need a building board, hobby knife, fine sandpaper, and glue.

Jimmie Allen Special

20" wingspan
Class: Sport flying model
Building Skill / Flying Skill: Easy / Easy
kit #CA03LC price: $25.95
Jimmie Allen TissueCal Markings
Jimmie Allen TissueCal™ markings

Includes 4 different sets of Jimmie Allen markings printed on white Easy Built Lite tissue.

item #B100 price: $7.85/sheet
Read A Story About Jimmy Allen Models

See our other Jimmie Allen kits.

Skokie (Laser Cut)
Jimmie Allen MC B-A Parasol
Blue Flash Racer (Laser Cut)
Building Set for Rubber Power

Building Set for Rubber Power

Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Uhu glue stick, Sobo canopy glue, MagnaBoard XL™ set, Minus Magnets 20 pack, and Rubber Powered Model Airplanes book. Save 20% off individually priced items.

item B329 Price: $78.15
Building Set

Building Set

Excludes the book on rubber power and the Uhu stick. Includes a soft grip knife, 5 blades, straight point tweezers, 5.5" x 9" Self Healing Cutting Mat, Jet Instant glue, Jet Super glue, Jet Tips, Sobo canopy glue, MagnaBoard XL™ set, and Minus Magnets 20 pack. Save 20% off individually priced items.

item B332 Price: $64.95
Advanced Tool Set

Advanced Tool Set

Includes Sanding Stick with 120, 240, 320, 400, and 600 grit belts, Pull Saw Blade, K5 Heavy Duty Knife with beveled blade, Narrow Keyhole Saw Blades 5 pack, Curved Tip Tweezers, 1/16" Ball Tip Burnisher, Jewelers Needle Point Awl, Steel Ruler 6" x 1" with drill gauge, 15 piece drill set (1.05mm - 2mm). Save 15% off individually priced items.

item B330 Price: $43.08
Flight Pack for Rubber Power

Flight Pack for Rubber Power

Includes a 10:1 winder, moldable nose weight, FAI SuperSport rubber 32 feet each 3/32", 1/8", and 3/16" and 32 feet EBM 1/16" rubber. Save 25% off individually priced items.

item B331 Price: $29.06
Customer photos: Submit a photo of your model!

kit CA03LC Jimmie Allen Special (Laser Cut)
kit CA03LC Jimmie Allen Special (Laser Cut) kit CA03LC Jimmie Allen Special (Laser Cut)
kit CA03LC Jimmie Allen Special (Laser Cut) kit CA03LC Jimmie Allen Special (Laser Cut)

"Attached are photos of my recently completed Jimmy Allen Special.  It is shown with full embryo regalia.  I took it to the field for the first time last week and am still in the process of trimming, but it definitely flies and shows a lot of potential." - Mark Fineman

kit CA03LC Jimmie Allen Special (Laser Cut)

"Seven year old Aaron Narance is holding the Easy Built "Jimmy Allen Special" model ready for the 2009 contest season at the Cleveland Free Flight Society. The model was built by Aaron and his father, David Narance of Galion, Ohio. The Junior Birdman is wearing his grandpa's Navy flight helmet and is awaiting the signal to turn into the wind and launch all aircraft!" - David Narance

kit CA03LC Jimmie Allen Special (Laser Cut) kit CA03LC Jimmie Allen Special (Laser Cut) kit CA03LC Jimmie Allen Special (Laser Cut)

"Greetings from France. I think this bird flies very well." - Jean Marc Morin

kit CA03LC Jimmie Allen Special (Laser Cut) kit CA03LC Jimmie Allen Special (Laser Cut)

"Our Jimmie Allen Special and Ritz both fly well in the southern hemisphere too - Many hours of fun had and being had by both myself and the kids!" - Toby Wetherill

kit CA03LC Jimmie Allen Special (Laser Cut)

"Just a quick note to let you know what an enjoyable experience building the Jimmie Allen Special was. Being my first experience with tissue covering and having spent the last 10 years of my career as an auto CAD draftman I scaled it up to a 30 inch wingspan. I'm not new to modeling and have 4 WWI quarter scale airplanes under my belt. ... I used Minwax clear [to seal the tissue]. I was real happy with the results as it brushed on like dope and doesn't contribute to any shrinkage. I flew my Jimmie Allen Special yesterday. It flew like a champ. It was a bit windy so I'm only up to 300 winds. I did have to move the wing forward 1 inch to achieve the center of gravity, so I had to reposition the dowels before I went to the field." - Warren Niffenegger

kit CA03LC Jimmie Allen Special (Laser Cut)

 

08/14/18 12:06 AM (EDT)